I-YG22C I-Tungsten Carbide Cold Heading Iyafa, Amapellets ECarbide Esamende Ethuluzi Lokubopha

Incazelo emfushane:

Uhlobo	OD	ID	H	Ukubekezelelana
Uhlobo	OD	ID	H	OD	Id	H
D10~14×φd	10~14	1.0-5.0	15-40	D×+3%	d×-3%	H×+3%
D15~24×φd	15-24	1.5-8.0	20-60
D25~40×φd	25-40	1.5-25	30 - 60
D42~95×φd	42-95	2.0-50	20-95

Kunoma yimuphi omunye osayizi siyakwazi ukwenza ngokwezifiso ngokwezidingo zamakhasimende noma imidwebo

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Kungani Khetha Thina

Njengomkhiqizi ocebile nomphakeli, i-RenQiu HengRui Cemented Carbide Co., Ltd ekuhlinzekeni ngohlu olubanzi lokuqanjwa okubandayo kwe-Fastener Industries.Ama-pellets ethu anikezwayo akhiqizwa kusetshenziswa impahla eluhlaza yekhwalithi ephezulu ngokuhambisana namazinga omhlaba.Ama-pellets anikeziwe atholakala ngokucaciswa okuhlukahlukene futhi angenziwa ngokwezifiso ngokwesidingo samakhasimende.Okwamanje, lezi zifa zihlolwa ngokunembile kumapharamitha wekhwalithi ambalwa.

incazelo yemikhiqizo

Ukusebenza Kwebanga

I-Tungsten Carbide Cold Forging/heading Iyafa
Amabanga	Ukuminyana	TRS	Ukuqina	Ukusebenza nohlelo lokusebenza kuyanconywa
Amabanga	g/cm³	I-MPa	HRA	Ukusebenza nohlelo lokusebenza kuyanconywa
YG11	14.4	≥3000	88.5	Ukwakha noma ukugxiviza kufa ngenxa yezimpushana zensimbi nezimpushana ezingezona ezensimbi.
YG15	14	≥3400	87.5	Ngokwenza umdwebo ufa ngamashubhu ensimbi nezinduku ngaphansi kwe-High compressibility ratio;ukubhoboza, ukunyathela, ukukha amathuluzi ngaphansi kwengcindezi enkulu.
YG20	13.5	≥3800	85.5	Ukuze kwenziwe isitembu sezingxenye zewashi, amapuleti e-spring wezinsimbi zomculo, izimbiza zebhethri, amabhola ensimbi anosayizi omncane, izikulufu, ama-screw cap.
YG15C	14	≥4000	86.5	Ukuze uthole izingcezu zokubhoboza ama-cone kawoyela, sika amatshe athambile naqinile aphakathi nendawo; ukubhodla nokusika ukhuni oluqandisiwe, ukhuni oluthambile nokhuni lwangempela.
YG16C	13.9	≥3500	85.5	Ukuqiniswa komthelela kuyafa.
YG18C	13.7	≥3600	84.5	I-Impact resistance forging ifa, i-hot-press forging iyafa namarola.
YG20C	13.5	≥3800	83.5	Ifa ngenxa yokusetshenziswa kokumelana nokugqokwa noma ukumelana nomthelela.
YG22C	13.3	≥4000	83	Ukwakhiwa kwamantongomane kuyafa futhi ukukhanga komthelela omkhulu wokumelana kuyafa.
GT55	13.1	≥4250	82.5	Ikhanda lebhawodi elingenasici liyafa namarola.

Izici

• I-carbide enosimende ethembekile enokuqina kokuphuka kwesihloko nokwenza amantongomane

• Ukugqoka isikhathi eside amamaki e-carbide anosimende ahlangabezana nezidingo zemboni zezicelo ze-extrusion

• Isivuno esiphezulu esivela ku-Hyperion's quality cemented carbides

• Okukhiphayo okuphezulu okunezinketho zokubekezelela ezenziwe ngomthungo.

Inqubo Yokukhiqiza

Ukufaniswa Kwempahla→Ukugaywa Kwebhola Elimanzi→I-WC exubile kanye Amandla e-Cobalt→Ukucindezela→Izifudumezi Zokuhlanganisa E-HIP→Ukutholwa kwe-QC→Ukupakisha

Ukuqinisekisa ikhwalithi

Ngaphambi kokukhiqiza ngobuningi, sidinga ukwenza isilingo sokucindezela kanye ne-sintering, futhi sihlola ukubukeka nobukhulu, ukuminyana nobulukhuni bamasampula ane-micrometer, i-Metallurgical microscope, i-densitometer njll. ukuze siqinisekise ukuthi izidingo zemidwebo zingahlangatshezwana nazo ngaphambi kweqoqo. ukukhiqiza;Yonke imikhiqizo kufanele ihlolwe ngokuqinile yi-QC yethu.

Inkonzo Yethu

1. Sizozama konke okusemandleni ethu ukuphendula isicelo samakhasimende ethu phakathi namahora angama-24.
2. Sizogcina ukuxhumana okusebenzayo nokuphumelelayo namakhasimende ethu.
3. Sihlinzeka ngokulawulwa kwekhwalithi yezinga lokuqala kanye nezinsizakalo zangemuva kokuthengisa.

Isikhathi sethu sokulethwa

Sizoletha impahla ekhiqizwe ngobuningi zingakapheli izinsuku ezingama-30 ngemuva kokukhokha kancane, kanti, uma kunezicelo ze-soecific ngesikhathi sokulethwa.Singenza ushintsho ngokwesicelo samakhasimende, ngakho-ke isikhathi esifushane sokulethwa sitholakala ngokuphelele.

Isikhathi sethu sokukhokha

Ngokuvamile 30% T/T kusengaphambili, bhalansi 70% ngokumelene B/L ikhophi.Futhi ingashintsha ngokwesicelo samakhasimende.
Senza izingxenye ezinomumo nosayizi abahlukene ukuze zifane nezidingo zamakhasimende ethu ncamashi, kungakhathaliseki ukuthi adinga amabhulokhi noma amashidi, amasilinda, amabheringi, amathiphu noma amazinyo.

Okwedlule: I-Cemented Tungsten Carbide Cold Heading Pellets Yesihloko Esibandayo Iyafa

Olandelayo: I-YG25C Ishubhu Yokugaya Kahle ye-Tungsten Carbide Enomthelela Omuhle Kanye Nempilo ende